Wilwood Slotted Rotor Direction

Wilwood produces over 120 different rotor styles and diameters for street, racing and other high performance applications in standard, slotted and drilled and slotted styles. This makes the braking performance more reliable.

Drilled and Slotted Brake Disc Rotor Brake disc, Drill

Potentially faster rotor and brake pad wear.

Wilwood slotted rotor direction. All slots on our rotors are curved and strategically machined off the edge of the rotor to dramatically improve braking performance up to 30% over factory stock brake rotors. Stainless steel hose kit (front) all required hardware; Premium dimpled and slotted brake rotor kit.

A buddy of mine recently purchased black wilwood 14inch rotors and 6 piston calipers for his 68 camaro. Luckily, if your rotors are not labeled, there is an easy way to tell. Slotted and drilled rotors whats their direction?

Wilwood billet aluminum rotor hats; The direction of the slots on the outside of the rotor do not dictate whether the rotor is a left or a right. The cons of using slotted rotors.

Those rotors can have sharp edges around the slots. As with the plain rotors discussed above, the internal vanes should lean toward the back of the car. This improved directional design minimizes turbulence and flows up to 61% more air than any rotor tested.

I have seen the wilwood and brembo kits go with the veins pointing towards the front, but i have also seen other cars with the veins pointing in the opposite direction. Mike skelly of wilwood offered us a little history on the origin of drilled rotors. These rotors feature a patented aerovane ® optimal cooling vane design to improve rotor airflow, cooling and heat capacity.

Are at the rotor exit end of the caliper, in relation to the direction of rotor rotation. I guess the pads will full with paint if you do not take it off your self? Temporarily tighten the lock nuts.

The design helps the rotor’s ability to shed heat. Shim washers drivers side shown. The rotor should be centered in the caliper, photo 5.

Rear rotor and hat weight: Stoptech sportstop slotted rotors are machined with slots crossing the vanes, not parallel to them. Digg.com stumbleupon.com del.icio.us facebook reddit.com tags:

As road racing tires allowed greater track speeds in the 1960s, race teams began seeing a great loss in brake capability. Ensure that the caliper is mounted so the largest pistons are at the rotor exit end of the caliper, in relation to the direction of the rotor. I know i can ask wilwood but i thought to post it on the forum first.

If not, loosen the two bolts (11) and adjust the caliper (10) by using 0.032 inch thick shim washers (13). This is important because the curved vane rotors are designed to rotate in a particular direction. Wilwood produces over 120 different rotor styles and diameters for street, racing and other high performance applications in standard, slotted and drilled and slotted styles.srp drilled performance rotor.

On the top side of the rotor, follow up along the slot. Tuesday, february 24, 2009 7:45 pm. Typical installation configuration photographic tip

Yet, they have some drawbacks: The wilwood gt series directional vane rotors use curved vanes inside the vented portion of the disc, vs the regular straight vanes of some of the other rotor series. This is a common issue with inexpensive slotted rotors.

View the rotor through the top opening of the caliper. The direction of the slots on the face of the the rotor is not what determines the. View the rotor (6) through the top of the caliper (10).

If it is correct, it will point toward the back of the vehicle. For drilled and slotted rotors, it is important to pay attention to which is the left and right rotor. Now we are discussing if he needs to take the black coating off or if it goes off after using the brakes?

The brake performance dimpled and slotted brake kit is engineered to give incredible stopping power over factory rotors while reducing heat, noise, pad fade and brake dust. Unless the vehicle manufacturer specified otherwise, rotors with directional vanes are to be installed so that at the top edge of the rotor, the vanes sweep toward the back of the car. Wilwood 14.25 x 1.25 directional cast rotors;

The rotor (6) should be aligned in the center of the caliper (10). Which direction do slotted rotors get installed? In that era of organic and asbestos based pad friction material, a problem occurred with the adhesives used to fasten the pad to the steel backing plates.

Wilwood Brakes Chevelle Chevelle, 1972 chevelle, Brakes